1. Get comfortable

Sit somewhere calm. Place the flanges so your nipple is centred and doesn’t rub on the sides.

2. Turn it on

Long-press the Power button ⏻. The screen shows your vacuum level, the timer and the speed.

3. Start in Stimulation mode

Always begin in Stimulation: quick, light pulses that help your milk start flowing. Start at a low vacuum level and let your body respond.

4. Adjust vacuum and speed

The ↔ button switches between vacuum (suction strength) and speed (rhythm).

Then use − / + to lower or raise the level you selected.

Vacuum goes up to 9 levels and speed up to 5. Increase gently, one level at a time.

5. Switch to Expression when your milk flows

The Mode button ≋ lets you switch between Stimulation, Expression and Turbo. Once milk starts flowing, press it until Expression shows on the screen. It’s a slower, deeper rhythm, like a baby drinking. Adjust again to your most comfortable level.

6. Turbo (optional)

To use Turbo, press the Mode button ≋ until Turbo shows on the screen. It’s a stronger mode for when you want to express faster. The speed is fixed, so you only adjust the suction with − / + (up to 9 levels). Start low, and use it only if it feels comfortable.

7. Pause or stop

A short press on Power pauses and resumes. A long press turns the pump off. It stops automatically after 30 minutes. Please don’t pump longer than that.

Good to know

Pumping should feel firm but never painful. If it pinches, lower the vacuum or check your flange size.

Pumping one side only? Close the second hole on the motor with the small plug, and lower the vacuum a little first, because single pumping is stronger.

With both sides at once, the suction is shared between them, so it can feel a little weaker. That’s normal.

Night light: long-press ☼. Silent mode: press − and + together for 1.5 seconds.

Need help? Write to us at contact@nooramotherhood.ae